Bespoke Precast Concrete

Beam & Block Concrete Flooring Solutions

Poundfield Precast manufacture high quality concrete beam and block floors to exact required lengths, and in depths of 150mm and 225mm for both residential and commercial properties.

Poundfield Precast flooring systems carry the CE Mark Accreditation British Standard EN 15037-1:2008 so you can be assured of receiving consistently high quality precast concrete products manufactured to meet with current construction and installation best practices.

Beam & Block suspended flooring systems are cost effective, easy to install and can be laid in all weathers. They can be used for both ground and upper floor levels in domestic and industrial buildings and only minimal levels of excavation are required.

Inverted prestressed ‘T’ shaped concrete beams are laid down with standard concrete blocks between them providing an immediate working platform –beam & block floors provide good sound and thermal insulation and eliminate any problems caused by ground movement or sloped land.  In comparison to timber beams, they offer a longer span and are also maintenance free – unaffected by cold and wet weather. They are also draughtproof, damp proof and fire resistant.

Our precast concrete beams are suitable for use in a number of building projects, from one off properties to multi-million pound developments. Poundfield beams are made from a precision steel mould using pre-stressed steel wires covered in a bespoke concrete design to give a high quality product, this process enables Poundfield to have a superior finish to other suppliers known as Wet-Cast finish or A-Grade.

Contact Fact Sheet


Beam & Block Concrete Floors
Beam & Block Concrete Floors

Poundfield Precast Flooring Division specialises in the following sectors:

  • Large Contract Sites
  • Installations and Project Management
  • Self-build support and technical consultations
  • Extensions to domestic houses
  • Full technical support to builders merchants
  • Commercial and bespoke projects – from patios to railway platforms

What services do we offer?

  • Full packages on projects where applicable and unrestricted
  • Tailored designs to meet your requirements
  • Both beam and block and EPS systems available at request
  • U-values as low as 0.08W/m2K
  • BBA approved and CE accredited
  • Manufactured to 25mm increments
  • A range of infill blocks – all blocks are transversed tested for flooring
Beam & Block Concrete Floors
Beam & Block Concrete Floors

Timeline of events from enquiry to delivery

Enquiry
Customer to send drawings across to Poundfield Precast along with covering letter of what is required.

Quotation
Poundfield Precast will produce a quotation for the customer detailing price, extras and advising of proposed lead times (this period includes time for drawings to be produced). If there is any ambiguity surrounding what is required then we will send back a marked up plan detailing required supports and span directions. Average time 2-3 days for a quote.

Order
If the customer is happy with the price and delivery period we will require a written instruction to proceed.

Drawings
Once an order is received we will produce fully detailed layout drawings to be sent back to the customer.

Approvals
Customer is to approve our layout drawings. Approvals required within 24 hours to adhere to lead times set out in quotation.

Delivery
Beams will be manufactured and delivered following approvals. Confirmation of exact delivery vehicle and dates will be confirmed at this point. During busy periods lead times may be extended.

Concrete T-beams
N1 Beam Install

Contact the Beam and Block Concrete Flooring Team

If you would like some sales support for your business or branch then please speak to one of the flooring team who would be happy to organise some information to be sent out to you. We can offer branded banners, merchant counter packs with specification sheets for our beams and floor options. We can also provide training at our factory site for key members of your team to fully understand Beam and Block flooring. Our comprehensive training session will discuss in detail our beam types, demonstrate a beam and block install to help understand the process of how the flooring is installed onto the site and a chance to tour our facility to see how the beams are cast and cut.

Phone us on 01449 723150 or email [email protected]